Cantitate/Preț
Produs

Seismic Evaluation and Rehabilitation of Structures (Geotechnical, Geological and Earthquake Engineering, nr. 26)

Editat de Alper Ilki, Michael N. Fardis
Notă GoodReads:
en Limba Engleză Hardback – 05 Sep 2013
In the past, facilities considered to be at the end of their useful life were demolished and replaced with new ones that better met the functional requirements of modern society, including new safety standards. Humankind has recently recognised the threats to the environment and to our limited natural resources due to our relentless determination to destroy the old and build anew. With the awareness of these constraints and the emphasis on sustainability, in future the majority of old structures will be retrofitted to extend their service life as long as feasible. In keeping with this new approach, the EU’s Construction Products Regulation 305/2011, which is the basis of the Eurocodes, included the sustainable use of resources as an "Essential Requirement" for construction. So, the forthcoming second generation of EN-Eurocodes will cover not only the design of new structures, but the rehabilitation of existing ones as well.
Most of the existing building stock and civil infrastructures are seismically deficient. When the time comes for a decision to prolong their service life with the help of structural and architectural upgrading, seismic retrofitting may be needed. Further, it is often decided to enhance the earthquake resistance of facilities that still meet their functional requirements and fulfil their purpose, if they are not earthquake-safe. In order to decide how badly a structure needs seismic upgrading or to prioritise it in a population of structures, a seismic evaluation is needed, which also serves as a guide for the extent and type of strengthening. Seismic codes do not sufficiently cover the delicate phase of seismic evaluation nor the many potential technical options for seismic upgrading; therefore research is on-going and the state-of-the-art is constantly evolving. All the more so as seismic evaluation and rehabilitation demand considerable expertise, to make best use of the available safety margins in the existing structure, to adapt the engineering capabilities and techniques at hand to the particularities of a project, to minimise disruption of use, etc. Further, as old structures are very diverse in terms of their materials and layout, seismic retrofitting does not lend itself to straightforward codified procedures or cook-book approaches. As such, seismic evaluation and rehabilitation need the best that the current state-of-the-art can offer on all aspects of earthquake engineering. This volume serves this need, as it gathers the most recent research of top seismic experts from around the world on seismic evaluation, retrofitting and closely related subjects.
Citește tot Restrânge
Toate formatele și edițiile
Toate formatele și edițiile Preț Express
Paperback (1) 120659 lei  Economic 7-9 săpt.
  Springer – 27 Aug 2016 120659 lei  Economic 7-9 săpt.
Hardback (1) 80379 lei  Economic 7-9 săpt. +8978 lei  10-17 zile
  Springer – 05 Sep 2013 80379 lei  Economic 7-9 săpt. +8978 lei  10-17 zile

Din seria Geotechnical, Geological and Earthquake Engineering

Preț: 80379 lei

Preț vechi: 86429 lei
-7%

Puncte Express: 1206

Preț estimativ în valută:
15557 18351$ 13303£

Carte tipărită la comandă

Livrare economică 15-29 septembrie
Livrare express 07-14 august pentru 9977 lei

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319004570
ISBN-10: 3319004573
Pagini: 520
Dimensiuni: 155 x 235 x 33 mm
Greutate: 0.94 kg
Ediția: 2014
Editura: Springer
Colecția Springer
Seria Geotechnical, Geological and Earthquake Engineering

Locul publicării: Cham, Switzerland

Public țintă

Research

Cuprins

Preface
1. Surrealism in Facing the Earthquake Risk
2. Rapid Seismic Assessment Procedures for the Turkish Building Stock
3. Post-Earthquake Risk-Based Decision Making Methodology for Turkish School Buildings
4. Proposed Vulnerability Functions to Estimate the Real Damage State of RC Buildings after Major Turkish Earthquakes
5. Probabilistic Path Finding Method for Post-Disaster Risk Estimation
6. Seismic Behaviour of Thin-Bed Layered Unreinforced Clay Masonry Shear Walls Including Soundproofing Elements
7. Assessing Seismic Vulnerability of Unreinforced Masonry Walls Using Elasto-Plastic Damage Model
8. Implementation of Experimentally Developed Methodology for Seismic Strengthening and Repair of Historic Monuments
9. Shaking Table Tests of a Full-scale Two-Storey Predamaged Natural Stone Building Retrofitted with the Multi-Axial Hybrid Textile System “Eq-grid”
10. Application of Mesh Reinforced Mortar for Performance Enhancement of Hollow Clay Tile Infill Walls
11. Shake Table Tests on Deficient RC Buildings Strengthened Using Post-Tensioned Metal Straps
12. Bond Strength of Lap Splices in FRP and TRM Confined Concrete: Behaviour and Design
13. Finite Element Modeling of Seismic Performance of Low Strength Concrete Exterior Beam-Column Joints
14. Experimental Behavior of Non-Conforming Full Scale RC Beam-Column Joints Retrofitted with FRP
15. Seismic Rehabilitation of Concrete Buildings by Converting Frame Bays into RC Walls
16. Pseudo-Dynamic Tests of 4-Storey Non-Ductile Frames with RC Infilling of the Bay
17. RC Infilling of Existing RC Structures for Seismic Retrofitting
18. Hybrid Control of a 3-D Structure by using Semi-Active Dampers
19. Substructured Pseudo-Dynamic Tests on Seismic Response Control of Soft-First-Story Buildings
20. Towards Robust Behavioral Modeling of Reinforced Concrete Members
21. Earthquake Engineering Experimental Facility for Research and Public Outreach
22. Physical Modeling for the Evaluation of the Seismic Behavior of Square Tunnels
23. Susceptibility of Shallow Foundation to Rocking and Sliding Movements during Seismic Loading
24. Centrifuge Modeling of Liquefaction Effects on Shallow Foundations
25. Stability Control of Rafted Pile Foundation against Soil Liquefaction 
26. Experimental Assessment of Seismic Pile-Soil Interaction
27. Experimental Investigation of Dynamic Behaviour of Cantilever Retaining Walls
Index

Textul de pe ultima copertă

In the past, facilities considered to be at the end of their useful life were demolished and replaced with new ones that better met the functional requirements of modern society, including new safety standards. Humankind has recently recognised the threats to the environment and to our limited natural resources due to our relentless determination to destroy the old and build anew. With the awareness of these constraints and the emphasis on sustainability, in future the majority of old structures will be retrofitted to extend their service life as long as feasible. In keeping with this new approach, the EU’s Construction Products Regulation 305/2011, which is the basis of the Eurocodes, included the sustainable use of resources as an "Essential Requirement" for construction. So, the forthcoming second generation of EN-Eurocodes will cover not only the design of new structures, but the rehabilitation of existing ones as well.
Most of the existing building stock and civil infrastructures are seismically deficient. When the time comes for a decision to prolong their service life with the help of structural and architectural upgrading, seismic retrofitting may be needed. Further, it is often decided to enhance the earthquake resistance of facilities that still meet their functional requirements and fulfil their purpose, if they are not earthquake-safe. In order to decide how badly a structure needs seismic upgrading or to prioritise it in a population of structures, a seismic evaluation is needed, which also serves as a guide for the extent and type of strengthening. Seismic codes do not sufficiently cover the delicate phase of seismic evaluation nor the many potential technical options for seismic upgrading; therefore research is on-going and the state-of-the-art is constantly evolving. All the more so as seismic evaluation and rehabilitation demand considerable expertise, to make best use of the available safety margins in the existing structure, to adapt the engineering capabilities and techniques at hand to the particularities of a project, to minimise disruption of use, etc. Further, as old structures are very diverse in terms of their materials and layout, seismic retrofitting does not lend itself to straightforward codified procedures or cook-book approaches. As such, seismic evaluation and rehabilitation need the best that the current state-of-the-art can offer on all aspects of earthquake engineering. This volume serves this need, as it gathers the most recent research of top seismic experts from around the world on seismic evaluation, retrofitting and closely related subjects.

Caracteristici

The state-of-the-art in seismic evaluation & retrofitting is presented
Contributing authors are among the world's top experts in seismic design, evaluation & retrofitting
The subject is of prime practical importance internationally