Cantitate/Preț
Produs
Total produse
Vezi coșul
Recent Advances in Mechanical Engineering de Anil Kumar

Recent Advances in Mechanical Engineering: Lecture Notes in Mechanical Engineering

Editat de Anil Kumar, Amit Pal, Surendra Singh Kachhwaha, Prashant Kumar Jain
en Limba Engleză Paperback – 27 mai 2022

În volumul Recent Advances in Mechanical Engineering, abordarea practică primează, oferind un echilibru solid între rigoarea teoretică și datele experimentale obținute în laboratoare de cercetare și medii industriale. Recomandăm această lucrare pentru modul în care reușește să transpună concepte complexe de mecanică computațională și termodinamică în soluții tehnice concrete, precum generarea de energie din căldură reziduală folosind module termoelectrice sau analiza comportamentului tribologic al biocombustibililor. Cititorul care a aplicat deja ideile din Advances in Thermal Engineering, Manufacturing, and Production Management va găsi aici o completare necesară, orientată spre sustenabilitate și interacțiunea dintre energie și mediu, extinzând aria de expertiză de la fluxuri turbulente la tehnologii de fabricație rapidă și mecanica micro- și nano-structurilor. Față de alte lucrări ale editorilor, precum Geospatial and Hydrological Modelling for Sustainable Land and Water Management, care se concentrează pe resursele naturale, acest volum se ancorează ferm în ingineria sistemelor și proceselor de fabricație. Structura cărții urmărește o progresie logică, pornind de la știința materialelor și aerodinamică, trecând prin optimizarea designului de produs și ajungând la strategii pentru dezvoltare durabilă. Găsim în cuprins secțiuni dedicate atât metodelor tradiționale de prelucrare, cât și celor non-tradiționale, oferind o viziune de ansamblu asupra stadiului actual al tehnologiei în 2021. Este o resursă tehnică densă, de peste 1100 de pagini, care servește drept referință pentru implementarea unor soluții de inginerie mecanică adaptate cerințelor contemporane de eficiență energetică.

Citește tot Restrânge

Din seria Lecture Notes in Mechanical Engineering

Preț: 123169 lei

Preț vechi: 153961 lei
-20%

Puncte Express: 1848
Paperback 123169 lei
Hardback 122222 lei

Carte disponibilă

Livrare economică 08-22 august
Livrare express 25-31 iulie pentru 8307 lei

Livrare prin curier în România Termenul estimat este afișat lângă disponibilitate.
Transport gratuit pentru acest produs Plată online sau ramburs, în funcție de opțiunile comenzii.
Retur gratuit în 14 zile Comandă securizată și suport în română.
 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă

Specificații

ISBN-13: 9789811596803
ISBN-10: 9811596808
Pagini: 1208
Ilustrații: XXI, 1161 p. 625 illus., 521 illus. in color. In 2 volumes, not available separately.
Dimensiuni: 155 x 235 x 65 mm
Greutate: 1.8 kg
Ediția:1st edition 2021
Editura: Springer
Colecția Lecture Notes in Mechanical Engineering
Seria Lecture Notes in Mechanical Engineering

Locul publicării:Singapore, Singapore

De ce să citești această carte

Recomandăm acest volum specialiștilor și cercetătorilor care au nevoie de date experimentale actualizate și studii de caz din ingineria mecanică modernă. Cititorul câștigă acces la metodologii de optimizare a producției și soluții pentru sustenabilitate energetică. Este o investiție valoroasă pentru cei care doresc să înțeleagă tranziția de la prototiparea rapidă la implementarea industrială a noilor materiale și tehnologii de răcire.

Despre autor

Echipa de editori, coordonată de Anil Kumar, Amit Pal, Surendra Singh Kachhwaha și Prashant Kumar Jain, reunește experți cu o activitate academică prolifică în cadrul seriei Lecture Notes in Mechanical Engineering. Expertiza lor variază de la modelarea hidrologică și managementul sustenabil al resurselor, vizibilă în lucrări precum Geospatial and Hydrological Modelling for Sustainable Land and Water Management, până la aplicarea limbajelor de programare în mediu, așa cum este prezentat în Python for Water and Environment. Această diversitate de perspective permite o abordare multidisciplinară a ingineriei mecanice, punând un accent deosebit pe eficiența resurselor și inovația tehnologică în contextul unei economii sustenabile.

Descriere scurtă

This book presents the select proceedings of the second International Conference on Recent Advances in Mechanical Engineering (RAME 2020). The topics covered include aerodynamics and fluid mechanics, automation, automotive engineering, composites, ceramics and polymers processing, computational mechanics, failure and fracture mechanics, friction, tribology and surface engineering, heating and ventilation, air conditioning system, industrial engineering, IC engines, turbomachinery and alternative fuels, machinability and formability of materials, mechanisms and machines, metrology and computer-aided inspection, micro- and nano-mechanics, modelling, simulation and optimization, product design and development, rapid manufacturing technologies and prototyping, solid mechanics and structural mechanics, thermodynamics and heat transfer, traditional and non-traditional machining processes, vibration and acoustics. The book also discusses various energy-efficient renewable and non-renewable resources and technologies, strategies and technologies for sustainable development and energy & environmental interaction. The book is a valuable reference for beginners, researchers, and professionals interested in sustainable construction and allied fields. 

Cuprins

Specific Heat of Nanofluids - An Experimental Investigation.- Study of Effects of Part Commonality on Stochastically Variable Product Demand.- Application of a Goal programming to optimize the schedule and frequency of product advertisement in Telemedia.- Impact of wall angle, step size and spindle speed on forming force in SPIF.- Location and capacity allocation decisions to mitigate the impacts of unexpected man-made disasters in Delhi: A Goal Programming approach.- Single slope single basin active solar still integrated with ETCs: A Review.- A review on nuclear energy based hydrogen production methods.- Experimental investigations on bubble detection in water-air two-phase vertical columns.- Design Optimization and comprehensive study of three-way cylindrical-shaped PPE sterilizer.- Power generation from waste heat by using thermoelectric modules.- Effect of SiC nanoparticles concentration on the tribological behavior of karanja oil.- Performance Characteristics of Karanja BiodieselBlends Using Energy Audit Technique.

Notă biografică

Dr. Amit Pal is currently working as Professor at the Department of Mechanical, Automobile and Production & Industrial Engineering, Delhi Technological University (Formerly Delhi College of Engineering), Delhi.  He obtained his B.E. (Mechanical Engineering) from Vikram University, Ujjain and Master of Engineering from the University of Mumbai and Ph.D. from the Faculty of Technology, University of Delhi. He has more than 23 years of experience in teaching and research with major research interest areas which include IC engines, biofuels and waste management, pollution mitigation, etc. He has published 50 papers in reputed international journals. Prof. Amit Pal received commendable research award 2018 for the paper “Experimental Studies on Utilization of Prunus armeniaca L. (Wild Apricot) Biodiesel as an Alternative Fuel for CI Engine in Waste and Biomass Vaporization.” He also received the first prize for the research paper “Recent Developments in Biodiesel: PartI – Biodiesel Production Technology” and the Second prize for the research paper titled “Optimization of Solar assisted Production of Biodiesel from Cottonseed Oil”. He has been an expert member in various committees of CPCB India, DTC Delhi, GGSIPU, NIOS and NBOS India, etc. Prof. Amit Pal published 3 books on Renewable Energy, Advances in Mechanical Engineering, and Heat and Mass Transfer. He wrote many chapters in “Advances in Alternate and Renewable Energy Technologies”. Prof. Amit Pal has also successfully completed different research projects sponsored by the Government of Delhi, Arihant Energy Solutions, Mosarbear and DTU costing over 17 lakhs (INR). He is the life-time member of the Indian Society of Mechanical Engineers, the Indian Society of Technical Education, the Solar Energy Society of India and the Ultrasonic Society of India. Prof. Amit Pal organized many workshops, conferences and faculty development programmes and also delivered over 30 expert lectures in many reputedseminars, conferences, short-term courses, QIP and FDP programmes etc.  organized at DTU and other reputed organizations.   


Dr. Anil Kumar is Associate Professor in the Department of Mechanical Engineering, with additional charge of Additional Coordinator-Centre for Energy and Environment, Delhi Technological University, Delhi, India. He has completed his Ph.D. in Solar Energy from Centre for Energy Studies, Indian Institute of Technology Delhi, India, in the year 2007. He was Postdoctoral Researcher at Energy Technology Research Center, Department of Mechanical Engineering, Faculty of Engineering, Prince of Songkla University, Hat Yai, Songkhla, Thailand, in the discipline of Energy Technology from June 2015 to May 2017. He has also served as Assistant Professor in Energy Centre, Maulana Azad National Institute of Technology Bhopal, India, from 2010 to 2018, and the Department of Mechanical Engineering, UniversityInstitute of Technology, Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal, India, from 2005 to 2010. His areas of specialization are energy technology, renewable energy, solar energy applications, energy economics, heat transfer, natural rubber sheet drying and environmental issues. He has completed many research projects in these areas. He has more than 15 years of experience in the field of energy technology. He has published 120 papers in international peer-reviewed journals and 75 papers in the international/national conferences proceeding. He has received more than 3000 citations with h-index = 31. He has developed thin-layer drying model with his student in 2014. It is known as “Prakash and Kumar model”. This model is being used and cited by so many researchers around the globe. He has published 10 books with international/national publishers. He has also published 3 patents—one in the solar dryer and another in the solar photovoltaic thermal collector. He has supervised 9 Ph.D.scholars and 37 master students. Dr. Kumar has visited countries, namely UK, Thailand and Malaysia. He has received various awards and appreciation from reputed sources. Some of them are provided here: “Commendable Research Award 2019” for publishing quality research paper in Delhi Technological University, Delhi, India. Research Excellence Award 2016: The researcher has Top 20 Publications from the Web of Science database, honored by Dr. Chusak Limsakul, President Prince of Songkla University, Hat Yai, Thailand. “Appreciation” for Outstanding Service in the reviewer's committee and active reviewers during the year 2015 from International Institute of Engineers, Kolkata, and Elsevier. “Best Paper Award” in Global Conference on Energy and Sustainable Development (GCESD 2015), February 24–26, 2015, at Coventry University Technology Park, Puma Way, Coventry, West Midlands CV1 2TT.   

Dr. Surendra Singh Kachhwaha is Professor and Head, Mechanical Engineering Department, School of Technology, Pandit Deendayal Petroleum University, Gandhinagar.  He has accomplished research projects and consultancy work worth four crores. He completed his B.E. degree in Mechanical Engineering from M.B.M. Engineering College, Jodhpur. He did his M.Tech. in Heat Power from Indian Institute of Technology, BHU Varanasi, and Ph.D. in Evaporative Cooling from IIT Delhi. He has teaching experience of more than 32 years in thermal engineering at undergraduate and postgraduate levels. Dr. Kachhwaha has around 80 technical publications in reputed national and international journals and more than 100 publications in national/international conferences. His research interests include evaporative cooling, ice slurry generation, polygeneration, offshore wind energy and biodiesel production techniques. Dr. Kachhwaha has taught various thermal engineering courses at undergraduate and postgraduate levels and guided 33 M.Tech. dissertation and 7 PhDs. He servedas Faculty in Rajasthan Technological University, Kota and Delhi Technological University, Delhi, in the past.    

Dr. Prashant K. Jain is Associate Professor and Dean (Students) at PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, Jabalpur, India. He has over 25 years of research and teaching experience at UG and PG levels. He is graduated in Mechanical Engineering from Dr. H. S. Gour University Sagar in 1995 and did Master’s in Advanced Production Systems from Samrat Ashok Technological Institute (S.A.T.I.) Vidisha.  He has received Ph.D. Degree in the area of Rapid Prototyping/Additive Manufacturing, particularly on Part Strength studies in Selective Laser Sintering Process from Indian Institute of Technology Delhi, (IIT Delhi) Delhi in 2009. Dr. Prashant K. Jain was previously with Delhi Technological University Delhi (formerly known as Delhi College of Engineering) as lecturer in Mechanical Engineering Department. He has also served Indian Institute of Technology Delhi as project scientist and research associate where he was engaged in research work on error compensation in CNC machines and part quality improvement in Fused Deposition Modelling. Currently he is with PDPM IIITDM Jabalpur as Associate Professor and Dean (Students). He has more than 110 publications to his credit, published in International peer reviewed journals of repute, National and International conferences in India and abroad. He has guided 5 Ph.D.’s and 27 Master’s and several ongoing. He has been a resource person and delivered invited lectures, chaired scientific sessions in several National and International Conferences, STTP’s and QIP programs. His research interest extends from Geometric Modelling, CAD/CAM Integration, Incremental Sheet forming, Computational geometry, Rapid Prototyping & Tooling, Incremental sheet forming to Nano Technologies in Manufacturing.


Caracteristici

Presents select proceedings of the International Conference on Recent Advances in Mechanical Engineering Covers latest research and technological advances in mechanical engineering Discusses a wide range of topics, both conventional and non-conventional