Cantitate/Preț
Produs

Produced Water Treatment Field Manual

Autor Maurice Stewart, Ken Arnold
en Limba Engleză Paperback – 23 sep 2011
Produced Water Treatment Field Manual presents different methods used in produced water treatment systems in the oil and gas industry. Produced water is salty water that is produced as a byproduct along with oil or gas during the treatment. Water is brought along with the oil and gas when these are lifted from the surface. The water is then treated before the discharge or re-injection process. In the introduction, the book discusses the basic terms and concepts that describe produced water treatment. It also presents the different methods involved in the treatment. It further discusses the design, operation, maintenance, and sizing of the produced water treatment systems. In the latter part of the book, the ways to remove impurities in water are discussed, including choosing the proper filter, filtering equipment, filtering methods, and filtering types. The main objective of this book is to provide information about proper water management. Readers who are involved in this field will find this book relevant.

  • Present a description of the various water treating equipment that are currently in use
  • Provide performance data for each unit
  • Develop a "feel" for the parameters needed for design and their relative importance
  • Develop and understanding of the uncertainties and assumptions inherent in the design of the various items of equipment
  • Outline sizing procedures and equipment selection
Citește tot Restrânge

Preț: 33393 lei

Preț vechi: 44706 lei
-25%

Puncte Express: 501

Preț estimativ în valută:
6397 6946$ 5486£

Carte indisponibilă temporar

Doresc să fiu notificat când acest titlu va fi disponibil:

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9781856179843
ISBN-10: 1856179842
Pagini: 244
Dimensiuni: 110 x 186 x 14 mm
Greutate: 0.25 kg
Editura: Elsevier

Public țintă

Petroleum engineer, production engineer, drilling engineer, completion engineer, operations engineer, drilling manager, operations manager, project production engineer

Cuprins

Part One: Basic considerations
Chapter One: Pre-treatment considerations
Chapter Two: Upstream equipment considerations
Chapter Three: Process considerations
Part Two: Water treating equipment
Chapter Four: API Separators
Chapter Five: Skimmer Tanks and Vessels
Chapter Six: Plate Separators (Downflow/Upflow/Crossflow)
Chapter Seven: Free-flow Turbulent Coalescers
Chapter Eight: Induced Gas Flotation Units (Mechanical/Hydraulic)
Chapter Nine: Sparger Units
Chapter Ten: Hydrocyclones
Chapter Eleven: Combination Units
Part Three: Information required for design
Part Four: Influent water quality
Part Five: Equipment selection and performance
Part Six: Filtration
Chapter Twelve: Solids removal principles
Chapter Thirteen: Water injection system treatment steps:
Part Seven: Solids removal equipment
Chapter Fourteen: Multimedia Filtration
Chapter Fifteen:Deep-bed Upflow Filters
Chapter Sixteen: Deep-bed Downflow Filters
Chapter Seventeen: Deep-bed Nutshell Filters

Recenzii

"Published in a handy small format (4.5x7.5 inches), but not so small it inhibits readability, this guide contains the essential information necessary for produced water treatment using the format of an outline, with subjects followed by short definitions which in turn are followed by lists of key points and in some cases, a list of sample figures. Appendices contain definition of terms, descriptions of water sampling, and oil concentration analysis techniques. Many schematics, drawings, and tables are included. The book is derived from the authors' two-volume Surface production operations. Thoughtfully produced and authoritative, this volume will be essential to engineers and process designers in the field."--Reference and Research Book News