Cantitate/Preț
Produs
Total produse
Vezi coșul
Advances in Control Power Systems and Emerging Technologies de Mohamed Bendaoud

Advances in Control Power Systems and Emerging Technologies: Advances in Science, Technology & Innovation

Editat de Mohamed Bendaoud, Amine El Fathi, Farhad Ilahi Bakhsh, Siano Pierluigi
en Limba Engleză Hardback – iun 2024

Suntem de părere că progresul în ingineria electrică modernă depinde fundamental de optimizarea controlului convertoarelor de putere, iar un exercițiu concret prezentat în acest volum — studiul comparativ între controlerele Proportional-Integral (PI), Fuzzy Logic și Neural Fuzzy Logic pentru convertoarele de tip Boost — demonstrează clar această necesitate. Advances in Control Power Systems and Emerging Technologies nu se limitează la teorie, ci oferă parametri tehnici pentru implementarea unor soluții precum invertoarele semi-punte monofazate cu undă sinusoidală pură sau sisteme de încărcare rapidă pentru vehicule electrice urbane. Subliniem faptul că lucrarea este organizată riguros în patru secțiuni, pornind de la fundamentul mașinilor electrice și evoluând spre aplicații complexe de Industry 4.0 și tehnologii de antenă. Pe linia practică a volumului Innovations in Electrical and Electronic Engineering, dar cu un focus specific pe algoritmi de control avansați (precum Sliding Mode Control și Rețele Neurale Artificiale), această apariție din 2024 completează portofoliul editorilor, în special al lui Mohamed Bendaoud. Dacă în lucrarea anterioară, Advances in Electrical Systems and Innovative Renewable Energy Techniques, accentul cădea pe sursele regenerabile, volumul de față extinde cercetarea către automatizări inteligente și robotică mobilă. Merită menționat că structura cărții reflectă o tranziție logică de la hardware-ul de putere la software-ul de inteligență artificială aplicat în agricultură și medicină, oferind o perspectivă integrată asupra sistemelor electrice contemporane.

Citește tot Restrânge

Din seria Advances in Science, Technology & Innovation

Preț: 177127 lei

Preț vechi: 216008 lei
-18%

Puncte Express: 2657

Carte disponibilă

Livrare economică 27 iunie-11 iulie

Livrare prin curier în România Termenul estimat este afișat lângă disponibilitate.
Transport gratuit pentru acest produs Plată online sau ramburs, în funcție de opțiunile comenzii.
Retur gratuit în 14 zile Comandă securizată și suport în română.
 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă

Specificații

ISBN-13: 9783031517952
ISBN-10: 3031517954
Pagini: 348
Ilustrații: XVII, 328 p. 337 illus., 265 illus. in color.
Dimensiuni: 215 x 285 x 24 mm
Greutate: 1.21 kg
Ediția:2024
Editura: Springer
Seria Advances in Science, Technology & Innovation

Locul publicării:Cham, Switzerland

De ce să citești această carte

Această resursă este esențială pentru inginerii de sistem și cercetătorii care urmăresc implementarea algoritmilor de inteligență artificială în controlul puterii. Cititorul câștigă acces la studii de caz validate experimental la ICESA 2023, acoperind de la designul de micro-tractoare la sisteme de diagnostic medical. Este un instrument tehnic precis pentru cei care doresc să treacă de la simulări teoretice la prototipuri funcționale în contextul Industry 4.0.

Despre autor

Echipa editorială este condusă de specialiști recunoscuți în domeniu, printre care Mohamed Bendaoud și Siano Pierluigi, ambii având o experiență vastă în coordonarea publicațiilor tehnice rezultate din conferințe internaționale de prestigiu. Mohamed Bendaoud s-a specializat în modelarea și controlul sistemelor electronice de putere, fiind un promotor al integrării tehnicilor de control inteligent în sistemele electrice industriale. Contribuțiile lor anterioare, publicate adesea sub egida Springer, se concentrează pe convertoare de putere medie și mare, consolidându-le reputația de experți în fuziunea dintre ingineria electrică tradițională și noile tehnologii de automatizare.

Descriere scurtă

This edited book is an outcome of the selected papers presented at the International Conference on Electrical Systems & Automation, (ICESA 2023) held from 29 to 30 May 2023 at the Faculty of Sciences and Technologies, Al Hoceïma, Morocco. This edited book is divided into two volumes. This volume is divided into four parts, each devoted to distinct yet interconnected aspects of the subject matter. The first part presents the control of electrical machines and power converters. It covers a comparative study of different control approaches, including Proportional-Integral (PI), Fuzzy Logic, and Neural Fuzzy Logic Controllers for Boost Converters. It also presents an innovative approach for single-phase half-bridge inverters and improved direct torque control of dual three-phase permanent magnet synchronous motors. Part 2 of the book, titled "Control Systems & Automation", thoroughly explores advanced control and automation technologies in electrical systems. These chapters collectivelyshowcase the latest developments and research across various engineering domains. Several control approaches have been discussed such as fuzzy control, sliding mode control, artificial neural networks (ANN), and machine learning. The third part highlights emerging technologies and applications in various fields such as mobile robots, industry 4.0, agriculture, and health. The chapters cover a wide range of topics, including intelligent navigation for autonomous robots, self-driving car perception and pedestrian detection, machine learning for cloud and IoT-based smart agriculture, outdoor navigation systems for micro-tractors, healthcare intelligent systems for melanoma image classification, maximizing the performance of Light Emitting Diode Luminaires. The research explores innovative solutions and technologies in different domains, aiming to improve functionality in various applications. Part 4 of this book is dedicated to "Advanced Wireless Communication and Antenna Technology". This part explores cutting-edge developments and innovations in the realm of wireless communication and antenna design, with a focus on their applications and impact in various fields.

Cuprins

Part One: Electrical Machines & Power converters.- 1. Improved Direct Torque Control of Dual Three Phase Permanent Magnet Synchronous Motor.- 2. The Impact of Fitness Functions for Optimal Tuning of PID Controller Applied to DC Motor.- 3. Feasibility of a Power and Control System for an Autonomous Photovoltaic Hot Plate Type Cooker (600 Wp).- 4. Comparative Study of Proportional–Integral, Fuzzy Logic and Neural Fuzzy logic Controllers for Boost converter.- 5. Study and implementation of a single-phase H-bridge inverter and development of the MOSFET gate driver.- 6. A new SPWM approach for high-performance single-phase half-bridge inverters with pure sine wave.- 7. Study and realization of a single-phase solar inverter with harmonics rejection.- 8. High power charger with d-q control and conventional buck converter for fast charging a city car.- 9. An Investigation of Overall Indices’ Sensitivity in Detecting Voltage Collapse Proximity inPower Systems.- 10. Design of Switched Capacitor Based Interfacing Circuit for Lossy Capacitive Sensor in Power System Monitoring.- Part two:Control Systems & Automation.- 11. State-of-charge estimation of a lithium-ion battery in an electric vehicle using the XGBoost method.- 12. Evaluation of Charging Protocols for Lithium-ion Batteries Using Battery Equivalent Circuit Model.- 13. The Influence of PVTf on Machine Learning Estimation of IGBT Junction Temperature.- 14. Performing ANN fault tolerant control based Dynamic Voltage Restorer over a PV tied microgrid in accordance with the new Moroccan Grid Code requirements.- 15. Unmanned Aerial Vehicle Path Planning Algorithms for Very High Voltage Transmission Lines Inspection.- 16. Continuous Approximation of Stochastic Petri Nets: Adaptive maximal firing speeds.- 17. An electronic tool to differentiate between potatoes according to fertilization methods.- 18. Direct Fuzzy Logic controller Based on Sliding Mode for an Anti-Lock Braking System.- 19. Time-delay Sliding Mode Control of the Active Suspension System.- 20.  A New Sliding Mode Control Based on Neural Networks for a Single-Rotor Helicopter.- 21. Numerical Simulation of Flow in an Axial Turbojet Engine for Avionics System Design.- Part three: Emerging Technologies and Applications.- 22. Machine Learning for Cloud and IoT-based Smart Agriculture.- 23. Toward Intelligent Navigation for Autonomous Mobile Robots: Learning from the classics.- 24. An outdoor navigation system dedicated to a Moroccan micro-tractor based on SLAM algorithms and multisensor fusion.- 25. Self-Driving Cars Perception Pedestrian Detection.- 26. Graphic processing unit acceleration of an electrocardiogram denoising process using a hybrid approach.- 27. Health Care Intelligent System: Deep Residual Network Powered by Data Augmentation for automatic Melanoma Image Classification.- 28. Intelligent Bearing Fault Diagnosis using Artificial Neural Networks and IoT for Maintenance 4.0 Implementation.- 29. Acoustic assessment of a composite material based on plaster and date palm spathes.- 30. Maximizing Performance of Light Emitting Diode Luminaires for Road Illumination.- 31.  Intelligent control of electrical energy in a public lighting system by fuzzy logic method.- Part four: Advanced Wireless Communication and Antenna Technology.- 32.  Design and analysis of antenna arrays operating at microwave frequencies for biomedical applications.- 33. Wearable Textile Antenna for Mobile Health and Telemedicine Systems.- 34.  Mechanical Reconfiguration of Circular Patch Antenna using Metasurface for 5G Wireless Communication.- 35. Evaluation of the Exposition to ElectroMagnetics Field at 5G and 6G Frequencies.- 36. Multiclass AQM on TCP/IP routers: Modeling, analysis, and design.- 37. Design and Optimization of aSub-Threshold CMOS LDO Regulator with Improved Performance for IoT and Wearable Devices.- 38. Temperature-Compensated and Robust Bandgap Reference Voltage Circuit for High-Precision Sensors and Voltage regulators.- 39. Compact Design of SIW Resonator using Differential Evolution Algorithm.- 40. Improved approach to stabilize discrete-time delayed systems: controller for wind tunnels.

Notă biografică

Pr. Bendaoud Mohamed received the M.Sc. and Ph.D. degrees in Electrical Engineering from Cadi Ayyad University, Marrakech, Morocco, in 2012 and 2019, respectively. He is currently an associate professor at the National School of Applied Sciences (ENSA) of Khouribga, Sultan Moulay Slimane University-Morocco.
He has published over 15 papers (book chapters, international journals, and conferences/workshops), and 3 edited books. He is the founder and general chair of the International Conference on Electrical Systems & Automation. He has served and continues to serve on the technical program committees and as a reviewer of numerous international conferences and journals such as Journal of The Franklin Institute, Mechatronic Systems and Control. He is the editor-in-chief of the new ambitious “Journal of Electrical Systems & Automation” (JESA). He is the deputy director of the science and technology laboratory for engineers.

Caracteristici

Describes new intelligent control methods applied to power converters Highlights emerging technologies and applications in various fields such as robotics, agriculture, and health Explores Advanced Wireless Communication and Antenna Technology, revealing future connectivity