Cantitate/Preț
Produs
Total produse
Vezi coșul
A Real-Time Approach to Process Control de William Y. Svrcek

A Real-Time Approach to Process Control

Autor William Y. Svrcek, Donald P. Mahoney, Brent R. Young
en Limba Engleză Hardback – 31 ian 2014

With resources at a premium, and ecological concerns paramount, the need for clean, efficient and low-cost processes is one of the most critical challenges facing chemical engineers. The ability to control these processes, optimizing one, two or several variables has the potential to make more substantial savings in time, money and resources than any other single factor.

Building on the success of the previous editions, this new third edition of A Real-Time Approach to Process Control employs both real industry practice and process control education without the use of complex or highly mathematical techniques, providing a more practical and applied approach.

Updated throughout, this edition:

¿ Includes a brand new chapter on Model predictive Control (MPC)

¿ Now includes wireless and web-based technologies

¿ Covers bio-related systems

¿ Details the new multivariable control measure developed by the authors

¿ Includes PowerPoint slides and solutions to Workshop problems on the accompanying website: http://www.wiley.com/go/svrcek-real-time-3e

From the reviews of previous editions:

"Would appeal to practising engineers due to its "hands on" feel for the subject matter. But more importantly, the authors present these concepts as fundamentals of chemical engineering, in a way that is consistent with how professor teach at the universities." -Chemical Engineering Process (CEP)

"The book has been beautifully crafted" -Engineering Subject Centre

"Provides a refreshing approach to the presentation of process analysis and control" -The Chemical Engineer

Citește tot Restrânge

Preț: 99026 lei

Preț vechi: 135653 lei
-27%

Puncte Express: 1485
Paperback 35469 lei
Hardback 99026 lei

Carte tipărită la comandă

Livrare economică 10-24 octombrie

Livrare prin curier în România Termenul estimat este afișat lângă disponibilitate.
Transport gratuit pentru acest produs Plată online sau ramburs, în funcție de opțiunile comenzii.
Retur gratuit în 14 zile Comandă securizată și suport în română.
 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă

Specificații

ISBN-13: 9781119993872
ISBN-10: 1119993873
Pagini: 362
Dimensiuni: 175 x 250 x 24 mm
Greutate: 0.81 kg
Ediția:3rd Edition
Editura: Wiley
Locul publicării:Chichester, United Kingdom

Public țintă

Students in chemical and petroleum engineering; Industry Practitioners

Notă biografică

William Y. Svrcek, Department of Chemical and Petroleum Engineering, University of Calgary, Canada

Donald P. Mahoney, Chemical Industry Business Solutions, SAP AG, USA

Brent R. Young, Department of Chemical and Materials Engineering, University of Auckland, New Zealand

Cuprins

Author Biographies xi

Foreword and Endorsements xiii

Preface xv

Acknowledgements xvii

1 A Brief History of Process Control and Process Simulation 1

1.1 Process Control 1

1.2 Process Simulation 5

References 11

2 Process Control Hardware Fundamentals 15

2.1 Control System Components 15

2.2 Primary Elements 16

2.3 Final Control Elements 33

References 53

3 Fundamentals of Single-Input/Single-Output Systems 55

3.1 Open Loop Control 55

3.2 Disturbances 56

3.3 Feedback Control - Overview 57

3.4 Feedback Control - A Closer Look 60

3.5 Process Attributes - Capacitance and Dead Time 66

3.6 Process Dynamic Response 74

3.7 Process Modelling and Simulation 76

References 93

4 Basic Control Modes 95

4.1 On-Off Control 95

4.2 Proportional (P-Only) Control 97

4.3 Integral (I-Only) Control 102

4.4 Proportional Plus Integral (PI) Control 105

4.5 Derivative Action 107

4.6 Proportional Plus Derivative (PD) Controller 108

4.7 Proportional Integral Derivative (PID) Control 111

4.8 Digital Electronic Controller Forms 112

4.9 Choosing the Correct Controller 112

4.10 Controller Hardware 114

References 117

5 Tuning Feedback Controllers 119

5.1 Quality of Control and Optimization 119

5.2 Tuning Methods 123

References 132

6 Advanced Topics in Classical Automatic Control 133

6.1 Cascade Control 133

6.2 Feedforward Control 137

6.3 Ratio Control 140

6.4 Override Control (Auto Selectors) 142

6.5 Split Range Control 147

References 149

7 Common Control Loops 151

7.1 Flow Loops 151

7.2 Liquid Pressure Loops 153

7.3 Liquid Level Control 155

7.4 Gas Pressure Loops 165

7.5 Temperature Control Loops 166

7.6 Pump Control 172

7.7 Compressor Control 172

7.8 Boiler Control 179

References 182

8 Distillation Column Control 185

8.1 Basic Terms 185

8.2 Steady-State and Dynamic Degrees of Freedom 186

8.3 Control System Objectives and Design Considerations 188

8.4 Methodology for Selection of a Controller Structure 190

8.5 Level, Pressure, Temperature and Composition Control 192

8.6 Optimizing Control 199

Section Sidestream 199

8.7 Distillation Control Scheme Design Using Steady-State Models 204

8.8 Distillation Control Scheme Design Using Dynamic Models 212

References 213

9 Using Steady-State Methods in a Multi-loop Control Scheme 215

9.1 Variable Pairing 215

9.2 The Relative Gain Array 216

9.3 Niederlinski Index 220

9.4 Decoupling Control Loops 220

9.5 Tuning the Controllers for Multi-loop Systems 222

9.6 Practical Examples 222

9.7 Summary 232

References 232

10 Plant-Wide Control 233

10.1 Short-Term versus Long-Term Control Focus 233

10.2 Cascaded Units 235

10.3 Recycle Streams 236

10.4 General Considerations for Plant-Wide Control 241

References 242

11 Advanced Process Control 245

11.1 Advanced Process Control 245

11.2 Model Predictive Control 246

11.3 Dynamic Matrix Control 249

11.4 General Considerations for Model Predictive Control Implementation 253

References 254

Appendix A P&ID Symbols 257

Appendix B Glossary of Terms 261

Appendix C New Capabilities with Control Technology Hardware and Software 267

Workshop 1 Learning through Doing 279

Workshop 2 Feedback Control Loop Concepts 283

Workshop 3 Process Capacity and Dead Time 289

Workshop 4 Feedback Control 295

Workshop 5 Controller Tuning for Capacity and Dead Time Processes 303

Workshop 6 Topics in Advanced Control 311

Workshop 7 Distillation Control 321

Workshop 8 Plant Operability and Controllability 333

Index

Descriere

This third edition presents a theoretical and practical introduction to this increasingly important approach to process control. Assuming no prior knowledge, the text covers the applied fundamentals of process control, from instrumentation to process dynamics, PID loops, and tuning to distillation, multi-loop, and plant-wide control.

Textul de pe ultima copertă

Throughout the chemical industry, ever more emphasis is being placed upon extracting increasingly greater value from existing plant equipment. Improved process control is almost unique in its ability to deliver substantial operational improvements with little, or no additional, capital investment. As such, process control has rapidly become one of the most important and sought-after skills within the chemical industry. The industry needs graduates educated and trained in the latest and most relevant skills, as its practitioners rely heavily on commercially available process simulation tools and hands-on, time-based control strategy development techniques. A Real-Time Approach to Process Control brings together introductory process control education and real industry practice. While avoiding the use of complex and highly mathematical techniques, this text focuses instead on the more practical and applied time-domain techniques derived from modern process simulation. Assuming no prior knowledge of process control, this text provides both a theoretical and practical introduction to this increasingly important area. The use of computers in process control is a central theme running throughout this text, and their use in simulations and the software is carefully introduced. The reader will gain a thorough understanding of instrumentation, process design versus controllability trade-offs, control loop configurations and tuning, and practical techniques for the control of vessels, distillation columns and basic plant-wide control considerations. A Real-Time Approach to Process Control:
* Is an applied introduction to the theory and practice of modern process control.
* Avoids the use of complex mathematics, focusing instead on real-time systems.
* Introduces dynamic simulation software and enables the reader to understand how and why it is used.
* Includes many examples and carefully designed workshops, providing hands-on experience.
* Has its own Web site at http: //www.ench.ucalgary.ca/ real-time.
This essential introduction to modern process control is suitable for students taking process control courses, as well as engineers interested in learning more about real-time systems and applications of dynamic simulation software.