Cantitate/Preț
Produs

Modern Control Engineering: International Version

Autor Katsuhiko Ogata
en Limba Engleză Paperback – mai 2012

For senior or graduate-level students taking a first course in Control Theory (in departments of Mechanical, Electrical, Aerospace, and Chemical Engineering).
 
A comprehensive, senior-level textbook for control engineering.
 
Ogata’s Modern Control Engineering, 5/e, offers the comprehensive coverage of continuous-time control systems that all senior students must have, including frequency response approach, root-locus approach, and state-space approach to analysis and design of control systems. The text provides a gradual development of control theory, shows how to solve all computational problems with MATLAB, and avoids highly mathematical arguments. A wealth of examples and worked problems are featured throughout the text.
 
The new edition includes improved coverage of Root-Locus Analysis (Chapter 6) and Frequency-Response Analysis (Chapter 8). The author has also updated and revised many of the worked examples and end-of-chapter problems.

Citește tot Restrânge

Preț: 105319 lei

Preț vechi: 131649 lei
-20%

Puncte Express: 1580

Preț estimativ în valută:
20179 21975$ 17231£

Carte indisponibilă temporar

Doresc să fiu notificat când acest titlu va fi disponibil:

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9780137133376
ISBN-10: 0137133375
Pagini: 904
Dimensiuni: 202 x 235 x 48 mm
Greutate: 1.51 kg
Ediția:Nouă
Editura: Prentice Hall
Locul publicării:Upper Saddle River, United States

Cuprins

Contents
Preface
Chapter 1 Introduction to Control Systems
1—1 Introduction
1—2 Examples of Control Systems
1—3 Closed-Loop Control versus Open-Loop Control
1—4 Outline of the Book
 
Chapter 2 Mathematical Modeling of Control Systems
2—1 Introduction
2—2 Transfer Function and impulse Response Function
2—3 Atomatic Control Systems
2—4 Modeling in state space
2—5 State-Space Representation of Scalar Differential Equation System
2—6 Transformation of Mathematical models with MATLAB
2—7 Linearization of Nonlinear Mathematical Models
Example Problems and Solutions Problems
 
Chapter 3 Mathematical Modeling of Mechanical Systems and Electrical Systems
3—1 Introduction
3—2 Mathematical Modeling of Mechanical Systems
3—3 Mathematical Modeling of Electrical Systems
Example Problems and Solutions Problems
 
Chapter 4 Mathematical Modeling of Fluid Systems
and Thermal Systems
4—1 Introduction 152
4—2 Liquid-Level Systems
4—3 Pneumatic Systems
4—4 Hydraulic Systems
4—5 Thermal Systems
Example Problems and Solutions Problems
 
Chapter 5 Transient and Steady-State Response Analyses
5—1 Introduction
5—2 First-Order Systems
5—3 Second-Order Systems
5—4 Higher Order Systems
5—5 Transient-Response Analysis with MATLAB
5—6 Routh’s Stability Criterion
5—7 Effects of Integral and Derivative Control Actions on System
Performance 
5—8 Steady-State Errors in Unity-Feedback Control Systems
Example Problems and Solutions Problems
 
Chapter 6 Control Systems Analysis and design by the Root-Locus Method
6—1 Introduction
6—2 Root-Locus Plots
6—3 plotting Root Loci with MATLAB
6—4 Root-Locus Plots of Positive Feedback Systems
6—5 Root-Locus Approach to control Systems Design
6—6 Lead Compensation
6—7 Lag Compensation
6-8 Lag-Lead Compensation
Example Problems and Solutions Problems
 
Chapter 7 Control Systems Analysis and Design by the Frequency Response Method 
7—1 Introduction
7—2 Bode Digrams
7—3 Polar Plots
7—4 Log-Magnitude-versus-Phase plots
7—5 Nyquist Stability Criterion
7—6 Stability Analysis
7-7 Relative Stability Analysis
7-8 Closed-Loop Frequency Response of Unity-feedback Systems
7-9 Experimental Determination of Transfer functions
7-10 Control Systems design by Frequency Response Approach
7-11 Lead Compensation
7-12 Lag Compensation
7-13 Lag-Lead Compensation
Example Problems and Solutions Problems
 
Chapter 8 PID Controllers and Modified PID Controllers
8—1 Introduction
8—2 Ziegler- Nichols Rules for tuning PID controllers
8—3 Design of PID Controllers with Frequency Response Approach
8—4 Design of PID Controllers with Computational Optimization Approach
8—5 Modification of PID Control Schemes
8—6 Two-Degrees-of-freedom PID Control Schemes
8—7 Zero Placement Approach to Improve Response
Example Problems and Solutions Problems
 
Chapter 9 Control Systems Analysis in State Space
9—1 Introduction
9—2 State-space Representations of Transfer-Function Systems
9—3 Transformation of System Models with MATLAB
9—4 Solving the Time-Invariant State Equation
9—5 Some Useful Results in vector-Matrix Analysis
9-6 Controllability
9-7 Observability
Example Problems and Solutions Problems
  
Chapter 10 Control Systems Design of in State Space
10—1 Introduction
10—2 Pole Placement
10—3 Solving Pole-Placement Problems with MATLAB
10—4 Design of Servo Systems
10—5 State Observers
10—6 Design of Regulator Systems with Observers
10—7 Design of Control Systems with Observers
10—8 Quadratic Optimal Regulator Systems
10-9 Robust Control Solutions
Example Problems and Solutions Problems
 
Appendix A
Appendix B
Appendix C 
References
Index


Notă biografică

Dr. Katsuhiko Ogata graduated from the University of Tokyo (BS), earned an MS degree from the University of Illinois, and his Ph.D from the University of California, Berkeley. He is Professor Emeritus at the University of Minnesota.


Caracteristici

Chapter 8 first discusses PID control in general and then presents two-degrees-of-freedom control systems — Presents a computational (MATLAB) method to determine system parameters so the system will have the desired transient characteristics.
 
An improved chapter on the design of control systems in state space (Chapter 10) — This chapter treats pole placement and observer design and includes quadratic optimal control. MATLAB is extensively used in the design problems using pole placement and observer design.


An in-depth treatment of topics emphasizes both the basic concepts and the design aspects of control systems.


An accessible presentation that avoids highly mathematical arguments. The author introduces mathematical proofs only when they contribute to an understanding of the material.


Over 150 chapter-end worked problems and 180 unsolved problems clarify students' understanding of the material at strategic points throughout the text.


An introduction to the two-degrees-of-freedom control system and introduction to robust control. Presents a MATLAB approach to the design of high performance control systems.
 
A comprehensive coverage of root-locus analyses not found in other texts.
 
Detailed coverage of frequency response of control systems.

Caracteristici noi

  • The use of MATLAB is expanded to many control systems analysis and design problems (See Section 8-4). Computational optimization approach with MATLAB is emphasized throughout the text.
  • Over 150 chapter-end worked problems and 180 unsolved problems help students fully understand the text material. Many of the solved problems are new.
  • New introductory discussion of robust control theory explains robust control systems.
  • Several chapters are combined to create a more streamlined approach. There are 10 chapters now instead of 12.
  • Improved chapter on the design of control systems in state space (Chapter 10) — Treats pole placement and observer design. Chapter includes quadratic optimal control. MATLAB is extensively used in the design problems using pole placement and observer design.
  • Significantly revised chapters include:
    — Chapter 6 — Control Systems Analysis and Design by the Root-Locus Method
    — Chapter 7 — Control Systems Analysis and Design by the Frequency Response Method
    — Chapter 8 — PID Controllers and Modified PID Controllers — Chapter 8 first discusses PID control in general and then presents two-degrees-of-freedom control systems. MATLAB methods determine system parameters so the system will have the desired transient characteristics.
  • Updated Appendices
    — Laplace Transform tables and partial fraction expansion with MATLAB are presented in Appendix A and B.
    — Short summary of vector matrix analysis is presented in Appendix C. This Appendix will be useful in obtaining the inverses of n x n matrices that may be involved in the analysis and design of control systems.
  • To facilitate students' understanding of the material, improvements were made in the presentation of topics. Re-organized, streamlined material includes:
    — Modeling of mechanical systems and electrical systems are shortened and combined into one chapter
    — Fluid systems and thermal systems are combined into one chapter.
    — Root locus analysis and root locus design of control systems are combined into one chapter.
    — Frequency response analysis and frequency response design of control systems are combined into one chapter.