Handbook of Epoxy Blends
Editat de Jyotishkumar Parameswaranpillai, Nishar Hameed, Jürgen Pionteck, Eamor M. Wooen Limba Engleză Hardback – 7 iul 2017
Preț: 3449.82 lei
Preț vechi: 3791.00 lei
-9%
Puncte Express: 5175
Preț estimativ în valută:
660.94€ • 715.93$ • 566.80£
660.94€ • 715.93$ • 566.80£
Carte indisponibilă temporar
Doresc să fiu notificat când acest titlu va fi disponibil:
Se trimite...
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9783319400419
ISBN-10: 331940041X
Pagini: 1200
Ilustrații: XVIII, 1121 p. 558 illus., 164 illus. in color. In 2 volumes, not available separately.
Dimensiuni: 155 x 235 x 61 mm
Greutate: 2.1 kg
Ediția:1st ed. 2017
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland
ISBN-10: 331940041X
Pagini: 1200
Ilustrații: XVIII, 1121 p. 558 illus., 164 illus. in color. In 2 volumes, not available separately.
Dimensiuni: 155 x 235 x 61 mm
Greutate: 2.1 kg
Ediția:1st ed. 2017
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland
Cuprins
Part I - Epoxy/Rubber Blends
Introduction to Rubber toughened Epoxy Polymers
Novel Techniques for the Preparation of Different Epoxy/Rubber Blends
Miscibility and Phase Separation of Epoxy/Rubber Blends
Morphology of Epoxy/Rubber Blends
Spectroscopic Analysis of Epoxy/Rubber Blends
Rheology of Epoxy/Rubber Blends
Cure Kinetics of Epoxy/Rubber Polymer Blends Dynamic Mechanical Thermal Analysis of Epoxy/Rubber Blends
Thermal Properties of Epoxy/Rubber Blends
Mechanical Properties of Epoxy–Rubber Blends
Water Sorption and Solvent Sorption Behavior of Epoxy/Rubber Polymer Blends
Ternary System of Epoxy/Rubber Blend Clay Nanocomposite
Particulate Composites Based on Epoxy-Rubber Blends
Applications of Epoxy/Rubber Blends
Part II - Epoxy/Thermoplastic Blends
Introduction to Epoxy/Thermoplastic Blends
Novel Techniques for the Preparation of Different Epoxy/Thermoplastic Blends
Miscibility, Phase Separation, and Mechanism of Phase Separation in Epoxy/Thermoplastic Blends
Morphology of Epoxy/Thermoplastic Blends
Light Scattering of Epoxy/Thermoplastic Blends
Spectroscopic Analysis of Epoxy/Thermoplastic Blends
Rheology of Epoxy–Thermoplastic Blends
Cure Kinetics of Epoxy/Thermoplastic Blends
Dynamic Mechanical Thermal Analysis of Epoxy/Thermoplastic Blends
Thermal Properties of Epoxy/Thermoplastic Blends
Mechanical Properties of Epoxy/Thermoplastic Blends
Applications of Epoxy/Thermoplastic Blends
pVT Analysis of the Effect of Addition of Thermoplastics, Block-Copolymers, or Rubbers on the Curing Behavior and Shrinkage of Epoxy Resins Part III - Epoxy/Block-copolymer Blends
Introduction to Epoxy/Block-Copolymer Blends
Miscibility, Phase Separation, and Mechanism of Phase Separation of Epoxy/Block-Copolymer Blends
Morphology of Epoxy/Block Copolymer Blends
Spectroscopic Analysis of Epoxy/Block Copolymer Blends Rheology of Epoxy/Block Copolymer Blends
Cure Kinetics of Epoxy/Block Copolymer Blends
Dynamic Mechanical Thermal Analysis of Epoxy-/Block-Copolymer Blends
Thermal Properties of Epoxy/Block Copolymer Blends
Mechanical Properties of Epoxy/Block Copolymer Blends
Water Sorption and Solvent Sorption of Epoxy/Block copolymer and Epoxy/Thermoplastic Blends
Introduction to Rubber toughened Epoxy Polymers
Novel Techniques for the Preparation of Different Epoxy/Rubber Blends
Miscibility and Phase Separation of Epoxy/Rubber Blends
Morphology of Epoxy/Rubber Blends
Spectroscopic Analysis of Epoxy/Rubber Blends
Rheology of Epoxy/Rubber Blends
Cure Kinetics of Epoxy/Rubber Polymer Blends Dynamic Mechanical Thermal Analysis of Epoxy/Rubber Blends
Thermal Properties of Epoxy/Rubber Blends
Mechanical Properties of Epoxy–Rubber Blends
Water Sorption and Solvent Sorption Behavior of Epoxy/Rubber Polymer Blends
Ternary System of Epoxy/Rubber Blend Clay Nanocomposite
Particulate Composites Based on Epoxy-Rubber Blends
Applications of Epoxy/Rubber Blends
Part II - Epoxy/Thermoplastic Blends
Introduction to Epoxy/Thermoplastic Blends
Novel Techniques for the Preparation of Different Epoxy/Thermoplastic Blends
Miscibility, Phase Separation, and Mechanism of Phase Separation in Epoxy/Thermoplastic Blends
Morphology of Epoxy/Thermoplastic Blends
Light Scattering of Epoxy/Thermoplastic Blends
Spectroscopic Analysis of Epoxy/Thermoplastic Blends
Rheology of Epoxy–Thermoplastic Blends
Cure Kinetics of Epoxy/Thermoplastic Blends
Dynamic Mechanical Thermal Analysis of Epoxy/Thermoplastic Blends
Thermal Properties of Epoxy/Thermoplastic Blends
Mechanical Properties of Epoxy/Thermoplastic Blends
Applications of Epoxy/Thermoplastic Blends
pVT Analysis of the Effect of Addition of Thermoplastics, Block-Copolymers, or Rubbers on the Curing Behavior and Shrinkage of Epoxy Resins Part III - Epoxy/Block-copolymer Blends
Introduction to Epoxy/Block-Copolymer Blends
Miscibility, Phase Separation, and Mechanism of Phase Separation of Epoxy/Block-Copolymer Blends
Morphology of Epoxy/Block Copolymer Blends
Spectroscopic Analysis of Epoxy/Block Copolymer Blends Rheology of Epoxy/Block Copolymer Blends
Cure Kinetics of Epoxy/Block Copolymer Blends
Dynamic Mechanical Thermal Analysis of Epoxy-/Block-Copolymer Blends
Thermal Properties of Epoxy/Block Copolymer Blends
Mechanical Properties of Epoxy/Block Copolymer Blends
Water Sorption and Solvent Sorption of Epoxy/Block copolymer and Epoxy/Thermoplastic Blends
Notă biografică
Dr. Jyotishkumar Parameswaranpillai is a Department of Science and Technology (DST) Innovation in Science Pursuit for Inspired Research (INSPIRE) Faculty member at the Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology, Kochi-22, India. His research focuses on polymer blends, nanocomposites, and bio-nanocomposites. He has co-edited two research books, and authored over 40 research articles and several book chapters.
Dr Nishar Hameed is an expert on nanostructured polymer materials. He has put together a very solid body of research in a very short time with over 40 journal articles published. He has already won several awards as in his young research career including the recent Victorian Fellowship in Australia. His research interests include: nanostructured thermosets and nanocomposites, nanostructured polymer blends and complexes, smart thermoset materials, and block-copolymer nanomaterials for biomedical applications. <
Dr. Eamor M. Woo is Endowed Professor at the Department of Chemical Engineering, National Cheng Kung University in Tainan, Taiwan. His research interests focus on polymer physics, morphology and crystallization, thermal properties, polymer blends and miscibility, structure-property characterization, epoxy networks, cure kinetics and polymers for microelectronics, as well as advanced nanocomposites. Eamor M. Woo is Associate Editor on the Journal of Polymer Research, published by Springer.
Dr. Jürgen Pionteck is a senior scientific staff at the Leibniz Institute of Polymer Research Dresden, Germany, in the Department Functional Nanocomposites and Blends. His fields of work comprise the synthesis and chemical modification of reactive polymers, reactive compatibilization of polymer blends, modification of polymer interphases, electrically conductive blends and (nano) composites, interpenetrating polymer networks (ipn), and thermodynamics of polymers and blends.
Dr Nishar Hameed is an expert on nanostructured polymer materials. He has put together a very solid body of research in a very short time with over 40 journal articles published. He has already won several awards as in his young research career including the recent Victorian Fellowship in Australia. His research interests include: nanostructured thermosets and nanocomposites, nanostructured polymer blends and complexes, smart thermoset materials, and block-copolymer nanomaterials for biomedical applications. <
Dr. Eamor M. Woo is Endowed Professor at the Department of Chemical Engineering, National Cheng Kung University in Tainan, Taiwan. His research interests focus on polymer physics, morphology and crystallization, thermal properties, polymer blends and miscibility, structure-property characterization, epoxy networks, cure kinetics and polymers for microelectronics, as well as advanced nanocomposites. Eamor M. Woo is Associate Editor on the Journal of Polymer Research, published by Springer.
Dr. Jürgen Pionteck is a senior scientific staff at the Leibniz Institute of Polymer Research Dresden, Germany, in the Department Functional Nanocomposites and Blends. His fields of work comprise the synthesis and chemical modification of reactive polymers, reactive compatibilization of polymer blends, modification of polymer interphases, electrically conductive blends and (nano) composites, interpenetrating polymer networks (ipn), and thermodynamics of polymers and blends.
Caracteristici
Evaluates applications of epoxies, weighing their advantages and drawbacks
Spans epoxy rubber blends, epoxy thermoplastic blends, and epoxy block-copolymer blends
Explores synthesis and processing, analysis, characterization and properties of epoxy blends
Presents work by international experts from academia and industry in an accessible format
Includes supplementary material: sn.pub/extras
Spans epoxy rubber blends, epoxy thermoplastic blends, and epoxy block-copolymer blends
Explores synthesis and processing, analysis, characterization and properties of epoxy blends
Presents work by international experts from academia and industry in an accessible format
Includes supplementary material: sn.pub/extras